• +91-9302-214-784
  • ceo@wetpointcoolingtowers.com
  • Ganga Malanpur, Gwalior, Madhya Pradesh 474010
FRP COOLING TOWERS · JAMMU & KASHMIR

Cooling Tower Manufacturer in Jammu

FRP Towers, Built and Sold Direct from the Manufacturer
We supply and install FRP cooling towers for plants in Bari Brahmana, EPIP Kartholi, IGC Samba, Kathua and Srinagar – sized for this region’s summer heat and hard groundwater, not a generic catalog spec.
WHAT YOUR TOWER FACES IN JAMMU
45°CSummer peaks past 42°C, sometimes touching 45°C
JulyMonsoon humidity brings a completely different load
HardGroundwater harder than most mild-steel or GI towers are built for
MANUFACTURING SINCE 1996
PAN-INDIA DELIVERY
DIRECT MANUFACTURER, NO DEALERS

Trusted by Leading Pharma, FMCG & Engineering Units Across India

Our towers run inside Pharma plants, high-volume FMCG lines and engineering units across the country.

Why Jammu Plants Choose Us

FRP Body – No Corrosion from Jammu's Hard Water

Groundwater in and around Jammu runs harder than what most mild-steel or GI towers are designed for. Once the protective coating on a metal tower wears through, corrosion moves quickly. Our towers are FRP through the shell, so there’s no coating to fail and no corrosion path to worry about, season after season.

Engineered for Dual-Season Load (45°C Summers + Monsoon Humidity)

Summers here push past 42°C, sometimes touching 45°C, and then the monsoon brings a completely different humidity load by July. A tower built for only one of those conditions falls short for roughly half the year. We size ours against both.

Direct Manufacturer Pricing – No Reseller Markup

Every quote for Jammu, Kathua and Srinagar comes straight from us. No dealer re-quoting your requirement, adding a margin, or guessing at delivery timelines on your behalf.

Faster Spares & AMC Response Across J&K

Fill media, nozzles and drift eliminators are the parts that fail first. Because we deal with you directly, replacement parts and service visits reach your plant faster than they would through a multi-layer reseller chain.

Our Cooling Tower Range

Two FRP series, built for two different risk profiles. Pick the one that matches how your water circuit is actually used.
PHARMA-GRADE

Pultruded Series

Structural FRP with zero metal anywhere in the water path. Built for plants where a corrosion breach isn’t just a maintenance headache – it’s a GMP audit finding. Recommended for pharmaceutical, API and any product-contact cooling loop.
GENERAL INDUSTRIAL

WRT Series

A fully FRP-bodied round tower built for general industrial, FMCG and plastics/engineering loads that don’t need pharma-grade construction. Same protection against Jammu’s water hardness, at a lower entry cost.

Industries We Serve

Pharmaceutical & API Manufacturing

For GMP-audited plants in Bari Brahmana and EPIP Kartholi, where corrosion in the water circuit is a compliance risk, not just a repair job.

FMCG & Food Processing

Hygienic materials and stable cooling through peak summer production – built for the FMCG and food-processing lines that make up a large share of this belt.

Plastics, Moulding & Engineering Units

For injection moulding, extrusion and general engineering lines in Bari Brahmana and IGC Samba, where cooling water temperature has a direct effect on cycle time and part quality.

Locations We Serve – Direct Manufacturer Coverage Across Jammu & Kashmir

We supply, install and service cooling towers across the following locations, with no reseller sitting between your plant and us.
LocationWhat we offer there
Bari BrahmanaOur core service belt – pharma, API and FMCG units get the fastest spares and site-visit turnaround from here.
EPIP KartholiDirect supply for pharma and precision manufacturing units, with the same GMP-aligned Pultruded option.
IGC SambaCooling towers for engineering, plastics and general industrial lines running multi-shift production.
KathuaDirect manufacturer supply and AMC support – no reseller chain in between.
SrinagarSame manufacturer-backed pricing, spares and service as our Jammu belt, extended into the valley.

Specifications at a Glance

ParameterWRT Series (Round FRP)Pultruded Series
Capacity range (TR)To be confirmed against your site loadTo be confirmed against your site load
Material of constructionFRP body, PVC/CPVC fillPultruded FRP structural members
Draft typeInduced draftInduced draft
Flow typeCounter flowCounter flow / Cross flow
Corrosion resistanceHigh – suited to chemical & pharma exposureVery high – structural FRP, no metal corrosion path
Best fit for Jammu buyersGeneral industrial, FMCG, plastics unitsPharma, API and chemical-handling units
Exact TR/capacity range is confirmed against your site’s water inlet/outlet temperature and flow rate – not a fixed catalog figure.

Our Process

1

Share Your Site & Water Conditions

Tell us your required capacity, inlet/outlet water temperature and industry type.
2

Get a Spec-Based Quote

We return a quote built around your actual site data, not a generic price list.
3

Manufacturing & Dispatch

Your tower is built to spec and dispatched with a confirmed delivery timeline.
4

Installation & Commissioning Support

Our team supports setup and commissioning so the tower is running to spec from day one.
5

Ongoing AMC & Spares Support

Scheduled inspections, spares and AMC coverage keep your tower running through every season.

What Sets Wet Point Apart

Service & Support After Installation

Genuine Spares – Fill Media, Nozzles, Drift Eliminators

These are the parts that wear out first, well before the tower structure does. We stock spares for both series and dispatch against your tower’s exact model and capacity.

AMC Plans for Zero Downtime

Scheduled inspection, fill and nozzle replacement, and basin cleaning on a fixed annual contract – so a monsoon-season slowdown doesn’t turn into an unplanned shutdown.

Questions That Jammu Buyers Asked About Cooling Tower Manufacturers

FRP. Jammu’s harder groundwater accelerates scale and corrosion in mild-steel or GI shells within a few seasons – both our WRT and Pultruded series are FRP-bodied to remove that failure point.

Yes, directly – with the same manufacturer-backed spares and AMC support we provide across Bari Brahmana and the Samba belt.

No. The WRT Series covers general industrial, FMCG and plastics applications at a lower cost. Pultruded earns its price where GMP compliance or zero product-contact-corrosion risk is a hard requirement.

Quoted directly against your TR requirement, series choice and actual site water and temperature data. Send us your site conditions and we’ll return a spec-based number.

Still Not Sure? Talk to Our Engineers

If you’re not sure which series fits your plant, or want a second opinion on an existing quote, our engineering team is happy to walk through your site conditions with you – no obligation.

Get a Cooling Tower Quote Built for Your Plant

Send us your water inlet/outlet targets, required capacity and industry type. We’ll tell you which series fits and why – directly, with no reseller in between.