ceo@wetpointcoolingtowers.com
+91-9595.114.784
 

frp cooling towers manufacturer

WRT Series

Salient Features

  • Designed for uniform water distribution and optimal heat transfer.
  • The special characteristic of fiber-reinforced plastic provide excellent resistance to corrosion.
  • These cooling towers are compact and light in weight.
  • These cooling towers offer easy installation and maintenance.

FRP Cooling Towers & Parts

Casing :

The tower casing is made of tough fibre-glass reinforced plastic (FRP) and has sufficient structure strength to withstand high wind velocities and vibrations. UV - stabilized resin is used along with gel coat for longer life.it is resistant to local impact and even if slight damage occurs, local repairs can easily be done. The portion of casing housing fill and eliminator has a round cross section. The water collection sump, also of FRP, is leak proof and avoids water spillage.

PVC Fills

The fill is of rigid Polyvinyl Chloride (PVC) and is of honeycomb design with very large contact surface area. The fill splits the air and water into several streams, increasing the time of contact and also heat transfer between water and air. The fill is in modules and is packed in the tower casing without ant cutting for curves. The air pressure drop through the fill is negligible. The fills are available with flute height of 12mm and 19mm with sheet thickness of 0.15 mm and 0.20 mm .

Sprinkler

Automatic rotary sprinkler system made of Aluminum alloy or cast steel material, with rotary head and sprinkler pipe distributes the hot water over the entire space of the filler. Sprinkler pipes are non-clogging, require low pressure to operate and assures uniform water flow with minimal operating pump head. The FRP eliminators attached to sprinkler pipe are specifically designed for low pressure drop and minimizes the drift loss of water.

Axial Fan

Specially designed energy efficient fans are of induced-draft axial type with adjustable pitch. Material chosen are non- corrosive of plastic, FRP or aluminum alloy. The high efficiency design ensures low running cost and the lowest possible noise level. Fan blade pitch is adjustable and dynamically balanced.

Motors

The motors are totally enclosed (IP55), Flange type , 420 V, 3 ph, 50 Hz., induction weather proof with extended shaft and are specially designed for cooling tower application.

Technical Data Series WRT FRP

Model No. Diameter Height Motor (hp) Fan Dia
WRT 01 930 1600 0.5 460
WRT 02 935 1690 0.5 460
WRT 03 1180 1650 0.75 700
WRT 04 1380 1800 1.0 750
WRT 05 1380 1800 1.0 750
WRT 06 1655 1890 1.0 750
WRT 07 1680 1890 1.0 750
WRT 08 1780 1950 1.0 850
WRT 09 1900 2150 2.0 930
WRT 10 1900 2800 3.0 1160
WRT 11 2150 2670 3.0 1160
WRT 12 2600 3560 3.0 1400
WRT 13 2895 3140 5.0 1400
WRT 14 2950 3250 5.0 1400
WRT 15 3000 3950 5.0 1600
WRT 16 3000 4115 7.5 1600
WRT 17 3300 4230 7.5 1800
WRT 18 3300 4230 10.0 1800
WRT 19 4450 3900 12.5 2400
WRT 20 4450 3900 15.0 2400

Note

In the interest of product improvement we reserve the right to implement changes without notice or obligation.